 |
 News |
|
|
|
| February 5, 2012 |
1. DigiElch 7 Electrochemical Simulation Software: Learn about all the functionality DigiElch 7 has to offer in the newly updated product brochure. Additional information available on the product page. http://www.gamry.com/assets/Uploads/DigiElch7-Brochure.pdf
2. Gamry Introduce eQCM Quartz Crystal Microbalance: This impedance-scanning electrochemical quartz crystal microbalance system can be used with any crystal from 1-10 mhz, and when used in combination with a potentiostat, can give you even deeper insight into your experiments.
|
 |
For more details please visit following link http://www.gamry.com/products/eqcm-quartz-crystal-microbalance/
|
| 3. Reference 30K Booster now available. Get upto 30 Amps. Gamry have launched the Reference 30k Booster. By simply connecting the Booster to the Reference 3000 Potentiostat, you will have power to spare and speed to burn - without sacrificing any hardware or software functionality. The Reference 30k Booster attaches to a Reference 3000 to bring the current limit up to +/- 30 A with compliance limits of +20 and -2.5 V. This high current device features impressive bandwidth allowing EIS measurements up to 300 kHz. The Reference 30k Booster attaches to a Reference 3000 to bring the current limit up to +/- 30 A with compliance limits of +20 and -2.5 V. This high current device features impressive bandwidth allowing EIS measurements up to 300 kHz. The Reference 30k Booster attaches to a Reference 3000 to bring the current limit up to +/- 30 A with compliance limits of +20 and -2.5 V. This high current device features impressive bandwidth allowing EIS measurements up to 300 kHz. |
 |
For more details please visit following link http://www.gamry.com/products/potentiostats/reference-30k-booster/
|
| |
|
|
|
October 6, 2009
Gamry Instruments
Gamry Instruments introduces DigiElch 5 from Elchsoft. DigiElch 5 brings a number of unique features to electrochemical simulation software. From exact 2-D simulation of band and disk microelectrodes to modeling surface adsorption using a Frumkin isotherm. DigiElch5 can simulate a wide range of systems. On the computational front, DigiElch 5 brings support for multicore CPUs to get more efficient calculations and an adaptive grid algorithm for smoother concentration profiles. DigiElch 5 is the brainchild of Dr. Manfred Rudolph. |
| |
|
For more details please visit following link http://www.gamry.com/Products/DigiElch5.html
|
| |
October 6, 2009
Quick Check of Potentiostat EIS Performance
The maximum frequency is an important specification for a potentiostat used to perform Electrochemical Impedance Spectroscopy (EIS). The majority of EIS manufacturers specify a maximum frequency of 1 MHz. Some manufacturer's specifications, however, misrepresent true system performance. Many EIS instruments specified to measure impedance at 1 MHz can apply a 1 MHz signal and measure a response but have huge errors when they do so. |
| |
|
| |
| |
June 22, 2009
Intevac Photonics' DeltaNu Unveils RAPID-ID
A Palm-Sized Materials Analysis and Identification Tool for the Plastics Industry
SANTA Intevac Photonics, a division of Intevac, Inc. announced today the availability of DeltaNu`s RAPID-ID, an innovative tool for the plastics industry. RAPID-ID is an industrial quality instrument that supports a lean manufacturing process by reducing waste at all stages of the supply chain. The tool can quickly analyze and identify most types and grades of industrial plastics, even through transparent packages and glass containers. RAPID-ID includes a baseline reference library of characteristic spectra for common resins and compounds. Designed with an open architecture that enables each user to quickly create a library specific to their needs, RAPID-ID can be specifically tailored to each factory. |
| |
|
| |
| |
September 16, 2009
Grading Coke and Coal Blends for Steel Production with a CRAIC Technologies Microphotometer
Coal is a vital component in steel production as a source of carbon. The CRAIC QDI CoalProTM Vitrinite Reflectance Measurement System is designed to ensure that the coal blends used in steel production are optimum and consistent batch-to-batch.
The QDI CoalPro™ Vitrinite Reflectance Measurement System is a microphotometer designed for the organic petrographic analysis using Standard Test Methodologies ISO 7404-5 and ASTM D2798. This microphotometer is configured to measure the reflectance from vitrinite coals & kerogens per these and other international protocols. However, it also has a very flexible design. The QDI CoalPro™ was developed anticipating the next generation of test protocols as well as for fluorescence and micro-imaging.
In its basic configuration, bundled with QDI CoalPro™software, the QDI CoalPro™ vitrinite reflectance measurement system grades vitrinite coals using the ISO 7404 and ASTM D2798 standard test methods. However, the QDI CoalPro™ can also be upgraded to a full QDI 302™ microscope spectrophotometer to measure the full reflectance spectrum and the spectral fluorescence from coal, kerogen and other petrochemicals. Additionally, it can capture full color images: all with the same instrument.
With no moving parts, the QDI CoalPro™ is durable and user friendly. Designed with flexibility and speed in mind, the QDI CoalPro™ Vitrinite Reflectance Measurement system rapidly measures vitrinite reflectivity and also has the ability to do other types of spectroscopic and petrographic analysis and imaging. With this flexibility of design, it will easily comply with future changes in coal testing methods and your own experiments.
The QDI CoalPro™ Vitrinite Reflectance Measurement system is a microphotometer that can also be upgraded to the QDI 302™ to acquire full range microspectra and digital images in absorbance, reflectance, and fluorescence. The lit hexagonal optical head is a trademark of CRAIC Technologies, Inc. |
| |
|
| |
| |
|
| |
|
For more details please visit following link http://www.biosensingusa.com/
|
| |
May 1, 2009
ALS SEC2000 Spectrometer
SEC2000 Spectrometer, a multi-channel spectrometer, is specifically designed for spectroelectrochemical measurements. The combination of the spectrometer and light source, allows having UV/VIS and VIS/NIR mode. In the light source, the lens is incorporated to the light in a small module, it eliminates the need of fiber optics. Detector and light source could be set to the cell holder in a 90 degrees angle for measurements of the fluorescence. |
| |
|
For more details please visit following link http://www.als-japan.com/1046.html
|
| |
December 7, 2009
Phadke Instruments to sell Spectech Nuclear Spectroscopy systems India
Phadke Instruments are appointed as authorised distributors in India by Spectrum Techniques, USA. Located in Oak Ridge Tennessee USA, Spectrum Techniques is the premier supplier of Exempt Quantity radioisotope sources and nuclear counting equipment. Applications include teaching modern physics,chemistry and biology, health physics training, radiation protection technology, nuclear medicine and research.
Products include:
- Geiger-Mueller counting systems and accessories
- Scintillation spectrometers and MCAs
- Gamma counters and wipe testers
- STX Software
- Disc and plastic laminate sources
- Isotope generator for half-life studies
- Tube and rod sources for well detectors
- Needle sources for cloud chambers
The Teaching system is available in three versions; basic, introductory and intermediate and include all the equipments (except PC) and a lab guide for graduate and undergraduate laboratory.
For more information, please click here. http://www.spectrumtechniques.com/ |
| |
 |
